Baugh

UV-A & White Light Products
BW UV-A 400		This high intensity UV-A flood lamp provides illumination for either fluorescent Magnetic Particle or Fluorescent penetrant testing where there is a requirement for a larger field of illumination than that achieved by a hand lamp. The BW UV-A 400 may be suspended above an MPI bench, or a work station in an inspection booth. The flood lamp is fan cooled, and has a dual supply voltage facility.
LABINO Lamps		Labino lamps combine greater UV-A intensity with low energy consumption, and therefore run cool without the necessity of a fan. The lamps are available in either flood or spot versions, and their performance is optimised to emit as much UV-A light at 365nm as possible, enhancing fluorescent inspection processes.
UV-A Bulbs and Filters		Replacement Bulbs and Woods Filter Glasses are available for 100W hand lamps. Filter glasses, if scratched or damaged should always be replaced due to the potential emission of harmful radiation. Further, due to the high output of UV-A lamps, it is recommended that operators should always wear UV-A absorbing spectacles. Bulbs, Filters, and Spectacles are held in stock.
Radiometers and Light Meters		Several Radiometers and White Light Meters are available for monitoring UV-A irradiance and white light illuminance levels in inspection areas. These parameters are critically important and must be monitored regularly to ensure procedural conformity and test integrity.