BAUGH & WEEDON NDT
|
BAUGH & WEEDON NDT |
|
TYPE 1241 - TECHNICAL SPECIFICATION |
|
| Environmental | Indoor use |
| Altitude | Up to 2000 metres |
| Temperature | 5°C to 40°C |
| Power Supply | 115V or 230V AC (internally selectable), 50/60Hz |
| Installation Category | III |
| Pollution Degree | 2 |
| Outputs | 1 set of volt-free changeover contacts (AC 240V 3A resistive, DC 30V 3A resistive) Solid state outputs are available upon request |
| Detection time | The time between the sensing heads being fully covered by two sheets, and the relay contacts closing is 60mS. |
| Dimensions | |
| Control Unit | 246 x 135 x 67mm |
| Sensing Heads | RX: 103mm long, 32mm dia. TX: 64mm long, 32mm dia. placed nominally 70mm apart. |
|
Baugh & Weedon NDT has a policy of continuous improvement, thus this specification may change. |
|
| Baugh and Weedon Ltd. Beech Business Park, Tillington Road, Hereford, HR4 9QJ Telephone 01432 267671 • Fax 01432 359017 • email sales@bandwndt.co.uk |
 |
| |