BAUGH & WEEDON NDT

Home

 Back

DIGIMAG Series - TECHNICAL SPECIFICATION

DIGIMAG 2000
Input Voltage 230V AC, Single Phase, 50/60Hz
Input Current (Max) 60A
Output Current PEAK AC  
    AC 2000A
    HWDC 2000A
Control Range 10% of maximum output to 100%
Duty Cycle 20% at maximum output (3 seconds ON, 12 seconds OFF)
Dimensions 305H, 260W, 755D
Weight 74Kg

DIGIMAG 3000
Input Voltage 415V AC, 3-Phase, 50/60Hz 
Input Current (Max) 130A
Output Current PEAK AC  
    AC 3000A
    HWDC 4200A
Control Range 10% of maximum output to 100%
Duty Cycle 20% at maximum output (3 seconds ON, 12 seconds OFF)
Dimensions 1000H, 740W, 610D
Weight 150Kg

DIGIMAG 5000
Input Voltage 415V AC, 3-Phase, 50/60Hz 
Input Current (Max) 250A
Output Current PEAK AC  
    AC 5000A
    HWDC 7000A
Control Range 10% of maximum output to 100%
Duty Cycle 20% at maximum output (3 seconds ON, 12 seconds OFF)
Dimensions 1160H, 940W, 610D
Weight 250Kg
   

ACCESSORIES
  1. A pair of 95mm sq. insulated cables, 2m long, fitted with bayonet plugs and spade terminals for use with contact prods
  2. A single, 5m long cable fitted with bayonet plugs at both ends, used to form a coil. Other cable lengths are available on request
  3. Rigid brass construction contact prods with nylon handles and replaceable tips
  4. A remote switch for foot operation with cable and connector to fit front panel socket
  5. An optional ink reservoir with integral recirculation system and outlet hose. Ink flow is linked to the magnetise shot and only occurs immediately prior to and during magnetising

Baugh & Weedon NDT has a policy of continuous improvement, thus this specification may change.

 

Baugh & Weedon Ltd. is a Minton, Treharne and Davies Ltd. Group Company
Baugh and Weedon Ltd. Beech Business Park, Tillington Road, Hereford, HR4 9QJ
Telephone 01432 267671 • Fax 01432 359017 • email sales@bandwndt.co.uk