BAUGH & WEEDON NDT
|
BAUGH & WEEDON NDT |
|
|
BW MagTest MY 2 - TECHNICAL SPECIFICATION |
|
|
SPECIFICATION COMPLIANCE: BS EN ISO 9934-3:2002 and ASTM 1444-01 |
|
| Cross-sectional Dimensions of the Poles | 20 x 20mm |
| Recommended Pole Spacing | |
| Maximum Smax | 165mm |
| Minimum Smin | 60mm |
| Tangential Field Strength, H1 | |
| At Smax | 2.5KA/m (typical) |
| At Smin | 7.4KA/m (typical) |
| Electrical Supply | |
| Voltage | 230V AC or 115V AC |
| Power | 575 watts |
| Frequency | 50/60 Hz |
| Cable Length (plug not fitted) | 4 metres |
| Current Waveform | Sinusoidal |
| Method of Current Control | AC mains |
| Duty cycle at maximum output | > 25% |
| Maximum Current ON Time | 30 seconds |
| Dimensions | 200 x 155 x 50mm |
| Weight | 2.2Kg |
| Ingress Protection rating | IP52 |
| For reference, the minimum requirements of EN ISO 9934-3(E) are: | |
| Duty Cycle > 10% | Exceeds |
| Current ON Time > 5 seconds | Exceeds |
| Surface Temperature of Handle < 40°C | Complies |
| Tangential Field Strength at Smax > 2KA/m (rms) | Exceeds |
| Lifting Force > 44N | Complies |
| The BW MY-2 also complies with the additional requirements of EN ISO 9934-3(E): The electromagnetic yoke has a power ON-OFF switch and is usable with one hand. | |
|
Baugh & Weedon NDT has a policy of continuous improvement, thus this specification may change. |
|
| Baugh & Weedon Ltd. is a Minton, Treharne and Davies Ltd. Group Company | |||
| Baugh and Weedon Ltd. Beech Business Park, Tillington Road, Hereford, HR4 9QJ Telephone 01432 267671 • Fax 01432 359017 • email sales@bandwndt.co.uk |
 |
| |